How to carry out routine maintenance and use of the speaker equipment?

Multimedia speaker manufacturers: the scientific maintenance of the speaker equipment is the key to extend its life. The following is a multimedia speaker manufacturers summed up some of the basic knowledge of routine maintenance.　　

　　1. The normal operating temperature of the speaker equipment should be 18 ~ 45. The temperature is too low will reduce the sensitivity of some machines (such as tube machines); too high, then it is easy to burn components, or make components premature aging. In summer, special attention should be paid to cooling, maintain air circulation.

　　2. Loudspeaker equipment should not be exposed to direct sunlight, should also avoid close to heat sources, such as heaters.

　　3. All function keys should be reset after the speaker equipment is used up. If the function keys are not reset for a long time, their pull button springs will be under stress for a long time, which will easily lead to dysfunction.

　　4. Multimedia speaker manufacturers: Before switching the power supply of the speakers, adjust the volume potentiometer to small.

　　5. Multimedia speaker manufacturers: open the CD player from front to back, then open the front stage and back stage, and adjust the volume potentiometer to small. When switching off, make the amplification function completely off. At this point, when you turn off the front-end equipment again, no matter how large the inrush current is, it will not affect the speakers.

　　6. The machine should be used frequently. On the contrary, it can prolong the life of the machine, such as some parts with motors (recording base, CD player, laser turntable, etc.). If they are not turned for a long time, some parts will be deformed.

　　7. Switch on the machine regularly. In the case of long-term non-use, especially in the humid and hot season, power on the machine for half an hour every day. This will use the heat generated by the components in the machine when it is working to expel moisture, internal coils, speaker voice coils, transformers, etc. It can prevent damage by moisture.

　　8. Wipe the surface of the machine with a clean damp soft cotton cloth every so often; when not in use, cover the machine with a dust cover or cloth to prevent dust from entering.

　　9. multimedia speaker manufacturers: according to the principle of electronics, any electronic equipment in the charged working state, should not be connected or disconnected from other equipment.