Principle considerations for applying electromagnetic buzzers include the following:
1. Supply Voltage: Electromagnetic buzzers usually require a specific supply voltage for proper operation. When in use, be sure to confirm that the supplied supply voltage meets the rated voltage requirements of the buzzer, too high or too low a voltage may result in the buzzer does not work properly or damaged.
2. Current protection: In order to prevent the electromagnetic buzzer from being damaged by overloading or short-circuiting, it is recommended that an appropriate current protection device, such as a fuse or protection circuit, be included in the circuit.
3. Work cycle: Electromagnetic buzzers generate a certain amount of heat during operation, which may lead to overheating when used continuously for a long period of time. Therefore, in the use of electromagnetic buzzer, should pay attention to the control of its working cycle, avoid long time continuous use.
4. Working environment: electromagnetic buzzer is usually used in harsh environments, such as high temperature, high humidity, corrosive gases. In the selection of electromagnetic buzzer, should be based on the actual use of the environment to choose the appropriate level of protection and material, to ensure that it can work properly and have good durability.
5. Installation location: the installation of electromagnetic buzzer should pay attention to avoid mutual interference with other equipment or components to ensure its normal operation. At the same time, attention should also be paid to the installation location of waterproof, dustproof and other issues to avoid affecting the performance and life of the buzzer.
In general, the application of electromagnetic buzzer need to pay attention to ensure that the power supply voltage, current protection, operating cycle, working environment and installation location, in order to ensure that the electromagnetic buzzer can work stably and reliably, and extend its service life.
Tel:0755-23222902
Fax:0755-23222905
Mobile: 135-3816-7547 (Mr Yong)
137-2371-6949 (Mr Liang)
159-1542-7541 (Mr Fan)
Address:Building B15,No.12,Fengye 5th Road,Fenghuang
Community,Fuyong Street,Baoan District,Shenzhen,China.